Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLIS H
THESE COMPRESSORS HAVE BEEN DESIGNED FOR
INTERMITTENT USE. THEY SHOULD ONLY BE USED FOR
APPLICATIONS WHERE USAGE WILL NOT EXCEED 50% OF
DUTY OVER THE COURSE OF ONE HOUR.
STORING THE PACKED AND UNPACKED
COMPRESSOR
For the whole time that the compressor is not used before
unpacking it, store it in a dry place at a temperature between
+5°C and + 45°C and sheltered away from weather. For the
whole time that the compressor is not used after unpacking
it, disconnect from the mains supply, drain the air tank place
sheets over it to protect it from dust, which may settle on the
components.
TRANSPORTING THE COMPRESSOR
When transporting the compressor in a vehicle, trailer, etc.
ensure that the air tank is drained and the unit is secured and
placed on a flat horizontal surface. Use care when driving
so to avoid tipping the unit over in the vehicle. Damage can
occur to the unit or surrounding items if unit is tipped.
LIFTING THE PS17
Always use two people when lifting and lift from the
recommended lift point handles (5A & 5B).
MOVING THE PS17
1. Grasp handle (5A) to support compressor.
2. Pull handle (5C) until fully extended (lock position).
WARNING: Risk of unsafe operation. Ensure proper footing
and use caution when rolling compressor so that unit does
not tip or cause loss of balance.
3. To move, roll compressor on tires using handle (5C) as
shown above.
Store compressor in a vertical or horizontal position.
PNEUMATIC CONNECTIONS
Make sure you always use pneumatic tubes for compressed
air with maximum pressure characteristics that are adequate
for the compressor. Do not attempt to repair tubes if faulty.
WE RESERVE THE RIGHT TO MAKE ANY MODIFICATIONS
WITHOUT PRIOR NOTICE WHENEVER NECESSARY.
13
Publicidad
