Descargar Imprimir esta página

Sportplus SP-ET-9910-B-iE Instrucciones De Uso página 44

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of e perience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. hildren shall
not play with the appliance. leaning and user maintenance shall not be made by
children without supervision.
Do not pull the cord when disconnecting the power adapter from the wall socket and
do not wind the power cable around the product.
onnect the power adapter to a readily accessible wall socket in order to be able to
disconnect the product from the power supply immediately in case of emergency.
Disconnect the power adapter from the wall socket to fully switch off the product.
Use the power adapter as disconnecting device.
Disconnect the power adapter from the wall socket before each cleaning and if not
using the product for a longer period of time.
Only use the power adapter provided for this product.
INFORMATION ON ASSEMBLY (GENERAL)
The product should be carefully assembled by a responsible adult. Ask for the
assistance of another, technically skilled person in case of doubt.
Before beginning assembly of the product, read all assembly steps carefully and
review the diagram.
Remove all packaging materials and lay out all the parts. This will give you a
good overview and simplify assembly. Shield the assembly surface from filth and
scratching by laying down suitable padding.
heck the components against delivery to make sure all are present. Do not
dispose of all packaging materials until assembly is completed.
Please note that there is always a risk of injury when using tools to carry out manual
tasks. Therefore, please e ercise caution when assembling this product.
Make sure your work environment is hazard free. For e ample, do not leave any
tools lying around. Place the packaging materials somewhere where they will
not pose any hazards during assembly. Packaging foil or plastic bags pose a
suffocation hazard for children
After assembling the product according to the instructions, make sure that all
screws, bolts and nuts are installed correctly and tightened.
If necessary, lay out protective padding (not included) beneath the product to
protect your floor as there is no guarantee that, for instance, the rubber feet will not
leave marks behind.
aution, risk of crushing Moving parts may crush, pinch, or cut body parts.
Do not touch moving parts while using the product
Make sure that all screws and bolts are securely tightened before using the product.
44

Publicidad

loading

Este manual también es adecuado para:

Sp-et-9910-w-ie sp-et-9910-es