506G4=M3x5
506G4=M4x5
9E94=*
The accessories are not included. They must be ordered separately.
2 Description
2.1 Indications for use
The Ottobock System Hands – voluntary opening – are suited solely for the
exoprosthetic fitting of the upper extremity in combination with Ottobock
arm components.
2.2 Field of application
The System Hands can be used for any residual limb length. The System
Hands – voluntary opening – are opened by a harness control system.
2.3 Safety instructions
Please forward the following safety instructions to your patients:
CAUTION
The Ottobock prosthetic components described in this manual have been
developed for everyday life activities and must not be used for unusual
activities such as extreme sports (free climbing, paragliding, etc.).
Careful handling of the prosthesis and its components not only increases
their service life but, above all, ensures the patient's safety!
Should the prosthesis be subjected to unusual stresses (such as a fall),
immediately contact your prosthetist and have the prosthesis inspected
for any damage. If necessary, the responsible prosthetist will pass the
prosthesis on to the Ottobock Service.
CAUTION
An upper extremity amputee's ability to drive a vehicle is determined on a
case-by-case basis. Factors include the type of fitting (amputation level,
unilateral or bilateral, residual limb conditions, design of the prosthesis)
and the amputee's abilities.
Set Screw
Set Screw
Lamination Ring (for hand size L/R6 ¾, L/R7 ¼,
(for hand size L/R6 ¾)
(for hand sizes L/R7 ¼, L/R7 ¾
and L/R8)
L/R7 ¾ and L/R8)
Ottobock | 9