Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the hot water shower
GB
MT
Cleaning accessories
Cleaning the appliance
Descaling the appliance
76
7)
Clean the steam delivery tube of the milk frother
8)
Replace the nozzle back onto the steam supply pipe.
Clean the hot water shower t after each use:
1)
After you have prepared the espresso/cappuccino and removed the sieve
holder w, wipe the entire surface of the hot water shower t with a moist
cloth so that all powder residues are removed.
2)
Then place an empty cup under the hot water shower
rotary knob 5 to the position „
t and it fl ushes the last remaining powder residues out. With this, the water
can spray a little.
3)
After about 20 seconds place the function rotary knob
" and switch the appliance off with the On/Off switch 3.
„
1)
Clean the sieve carrier
and the drip grill 8 in warm water.
NOTICE
►
If you put detergent into the water, it may have a negative eff ect on the taste
of the espresso. If the stains can only be removed with detergent, always
rinse the items afterwards with lots of clean water.
2)
Dry all parts well.
r is suitable for cleaning in the dishwasher.
3)
The drip tray
Clean the housing with a moist cloth. If necessary, use a little detergent on the
cloth.
Regularly descale the appliance. The appliance should be descaled after about
200 espresso preparations. Depending on the hardness of the water in your area,
this fi gure may diff er.
For descaling, use commercial available descaler for espresso machines. Proceed
as described in the instructions for usage of the descaler.
If you do not have a descaler, you can proceed as follows:
1 to the marking MAX.
1)
Fill the water tank
2)
Dissolve 2 tablespoons (about 30 grams) of citric acid (available in drug-
stores or chemists) into the water.
". Water fl ows from the hot water shower
w, the two espresso sieves 0 q, the water tank 1
t with a damp cloth.
t and turn the function
5 back to the position
Espresso Machine
Publicidad
