Publicidad
Idiomas disponibles
Idiomas disponibles
3)
Replace the water tank
4)
Switch the appliance on with the on/off switch
be in the position "
5)
Insert the sieve carrier
and place a cup under the sieve carrier w. As soon as the green heating-up
control lamp 4 glows, turn the rotary switch 5 to the position "
6)
Allow about 2 cups of water to pass through and then stop the process.
7)
Hold a container under the milk frother
8)
Place the rotary switch
heating-up control lamp 4 glows. Slowly turn the steam control knob 2 to the
position "+ ". Allow the appliance to create steam for about 2 minutes.
9)
After 2 minutes close the steam control knob
position "
10)
Let the scaling agent take eff ect for about 15 minutes.
11)
Repeat the steps 4 - 10 three times.
12)
Then place the rotary switch
through until the water tank 1 is empty.
13)
Rinse the water tank
to the Max marking.
14)
Turn the rotary switch
up control lamp 4 glows.
15)
Allow the water to run through.
16)
Repeat the steps 13 - 15 three times.
17)
Fill the water tank
18)
Turn the rotary switch
19)
Hold a container under the milk frother
knob 2 to the position "+" as soon as the green heating-up control lamp 4
glows.
20)
After about 1 minute close the steam control knob
to the position "
Espresso Machine
1 into the appliance.
". The steam control knob 2 is closed.
w, WITHOUT espresso powder, into the appliance
5 at the position "steam" and wait until the green
" and switch the appliance off .
5 at the position "
1 with clean water and then fi ll it with clean water up
5 to the position "
1 with water once again.
5 to the position " ".
" and switch the appliance off .
3. The rotary switch 5 must
z.
2, set the rotary switch 5 to the
" and let the solution fl ow
" as soon as the green heating-
t and slowly rotate the steam control
2, set the rotary switch 5
".
GB
MT
77
Publicidad
