Husqvarna FS 4600 G Manual De Usuario página 28

Maintenance
Replace the engine oil and the engine oil filter.
Replace the oil filter for the hydraulic propulsion
system.
Do a check of the pump belt for the hydraulic
propulsion system.
Do a check of the engine belt.
Do a check of the drive belts.
Lubricate the pivot on the hydraulic cylinder.
Lubricate the front wheels.
Lubricate the bearings on the front axle.
Lubricate the bearings on the rear axle.
Do a check of all fittings and nut bolts. Make
sure that they are installed correctly.
Do a check of the inner blade flange, the outer
blade flange and the blade nut.
Replace the fuel filter.
Do a check of the hydraulic oil level for the drive
system.
Do a check of the hydraulic oil level for the hy-
draulic lift pump.
Do a check of the gearbox oil level.
Do a check of the rear axle oil level.
Examine the wheels and wheel hubs for damage
and make sure that they are installed correctly.
Examine the air filter hose and hose clamps.
Replace the oil of the drive system.
Replace the oil of the hydraulic lift pump.
Replace the rear axle oil.
Replace the gearbox oil.
Replace the radiator coolant.
Replace the air filters.
Do a check that the coolant mixture is correct.
Technical data on page 48 .
Refer to
Lubricate the P1 and P2 male motor connectors.
28
Daily 50 h 100 h
X
X
X
X
X
X
X
X
X
X
X
250 h 500 h
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1657 - 004 - 07.03.2022
Yearly
X
X