Publicidad
Idiomas disponibles
Idiomas disponibles
2. Open the valve (A) on the engine.
3. Put a container below the valve on the radiator
coolant container.
4. Open the valve (B) on the radiator coolant container.
B
D
5. Remove the radiator coolant lid (C). The radiator
coolant drains from the system.
6. Close the valve (D) on the radiator coolant container.
7. Close the valve (E) on the engine.
8. Fill with radiator coolant until the radiator coolant
level is correct. Refer to
radiator coolant level on page 29 .
9. Install the radiator coolant lid.
To replace the air filters
1. Clean the area around the air filter housing.
1657 - 004 - 07.03.2022
A
E
To do a check of the
2. Open the 2 clamps on the air filter housing and
remove the air filter housing.
3. Replace the outer air filter (A) and the inner air filter
(B).
4. Install the air filters and close the 2 clamps.
Note:
If the 2 clamps of the air filter housing
cannot be closed, the air filters are not correctly
installed.
C
To lubricate the male motor connectors
1. Find and hold the P1 and P2 motor connectors.
2. Disconnect the P1 and P2 motor connectors.
B
A
41
Publicidad
