Husqvarna FS 4600 G Manual De Usuario página 46

4. Pull out and turn the knob for rear axle freewheel
function to engage the freewheel function.
5. Hold the operation handles and push the product to
move it.
WARNING:
product on a slope while the freewheel
is engaged. The product can move away
from you and cause injury to bystanders.
6. When the product is moved, push down the knob
for rear axle freewheel function to disengage the
freewheel function.
7. Turn the ignition key to the "0" position to stop the
engine.
To lift the product
WARNING:
equipment has the correct dimension.
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
46
Do not push the
Make sure that the lifting
Do not lift a damaged
WARNING:
or near a lifted product.
CAUTION:
handles to lift the product.
WARNING:
the product on rough level surface or on
slopes. The product can easily tilt rearward
or start to move and cause injury or damage.
Stay behind the product until the product is
on a level surface.
• Attach the lifting equipment through the lifting eye.
Do not walk or stay below
Do not use the operation
Be careful when you put
1657 - 004 - 07.03.2022