Husqvarna FS 4600 G Manual De Usuario página 40

1. Turn the 2 rear hatch latches (A) and remove the
rear hatch (B).
2. Push in the 2 tabs (C) on the connector and remove
the connector from the fuel filter.
C
C
D
D
3. Push in the 2 tabs (D) on the connector and remove
the connector from the fuel filter.
40
A
B
4. Remove the nut (E) and the bolt (F) on the fuel filter
holder.
G
E
5. Replace the fuel filter (G).
6. Install the fuel filter in the fuel filter holder.
7. Install the bolt and the nut on the fuel filter holder.
8. Install the connectors. The connectors will lock into
position when you hear a click.
9. Install the rear hatch and turn the 2 rear hatch
latches.
To replace the radiator coolant
WARNING:
the engine become cool before you open the
radiator coolant lid.
1. Put a container below the valve on the engine.
F
Risk of burn injuries. Let
1657 - 004 - 07.03.2022