Publicidad
Idiomas disponibles
Idiomas disponibles
OBLIGATORY SAFETY SIGNS TO BE DISPLAYED IN THE WORK PLACE
AND IN THE VICINITY OF THE ROTARY BLADES VACUUM PUMP
MOVING
PARTS
DO NOT ENTER THE WORKING
AREA OF THE MOVING CARDAN
SHAFT. AVOID WEARING WORK
CLOTHES WITH PARTS OR
FLAPS THAT COULD GET
HOOKED UP
CONDITIONS AND LIMITS OF USE – LIST OF DANGERS
In the Common Market countries, the installation must comply with directive 2006/42/CE and subsequent modifications,
while in the other countries it must comply with the safety regulations of the country.
This Rotary blades vacuum pump has been designed to create a vacuum or pressure inside a tank connected to it.
Under no circumstances must liquids, dust or any kind of solid matter enter the Rotary blades
vacuum pump because they could cause it to break. Therefore it is necessary to equip the system
with safety valves.
The use of the Rotary blades vacuum pump for any purpose other than that specified above is
absolutely forbidden, not provided for by the manufacturer and therefore highly dangerous.
Do not use the Rotary blades vacuum pump to handle flammable and/or explosive liquids and
materials or for materials that give off flammable gasses.
Read This Manual Before Using The Suction Unit/Compressor
Do not use the rotary blades vacuum pump in a potentially explosive atmosphere.
Never remove the guards fitted on the Rotary blades vacuum pump and always check their
efficiency every time the machine is used.
Any work on the machine must be carried out while it is not running.
Failure to comply with the instructions given in this manual may lead to the following dangers:
•
Danger of being crushed by the Rotary blades vacuum pump mass during handling and transport;
•
Danger of getting entangled in the shaft transmission parts if the necessary guards are removed;
•
Heat dangers due to the temperatures that can be reached by the Rotary blades vacuum pump;
•
Acoustic danger due to the noise generated and to failure to use personal means of protection;
•
Danger to operator's hands during testing with suction and delivery tubes detached from the pump;
•
Danger of abrasion from the shaft of the hydraulic pump support if the Rotary blades vacuum pump is operated
with the hydraulic pump removed;
•
Danger of projection of fluid and solid materials owing to an heavy breakage of the Rotary blades vacuum pump.
HIGH
TEMPERATURE
READ THIS MANUAL
BEFORE STARTING
TO USE THE ROTARY
BLADES VACUUM PUMP
DIRECTION OF ROTATION OF THE
HANDLE TO SELECT SUCTION OR
COMPRESSION PHASES
for use and maintenance serie MEC, STAR
DANGER
OF CRUSHING
MAINTENANCE
INDIVIDUAL MEANS OF
TO BE
PROTECTION THAT IT
CARRIED OUT
IS OBLIGATORY TO USE
instruction manual
pag. 31
Publicidad
