Publicidad
Idiomas disponibles
Idiomas disponibles
11.6 TECHNICAL ASSISTANCE
Contact the supplier of the complete system for technical assistance or supply of accessories and spare parts.
11.7 REGULAR SERVICING
SERVICING TO BE CARRIED OUT
Check oil circulation
Check oil level in tank
Check wear of blades
Check that the over-pressure and vacuum
regulator valves are working correctly
Wash oil tank
Wash body internally
Wash lubrication pump
Check that the overflow valves are
working correctly
Lubricate the power take-off
(versions M - MA - K - KA and D)
Wash and clean the valves
12 - PUTTING OUT OF SERVICE AND DEMOLITION
Before demolishing the Rotary blades vacuum pump the following materials should be separated:
• lubricating oil;
• parts in rubber and plastic;
• parts in cast iron and steel;
and disposed of correctly.
Do not discard the Rotary blades vacuum pump in the environment.
For disposal of the lubricating oil make use of specialised treatment services.
HOW TO PROCEED
Inspect the level sight glasses
Use the oil level on outside of tank
Remove threaded plug
Remove valves
Remove tank
Put in oil + diesel oil (after washing
lubricate with oil only)
Use a brush and compressed air
Remove valves
Oil the P.T.O. with a brush and lubricating
oil
Remove valves
for use and maintenance serie MEC, STAR
FREQUENCY
Once a day
Once a week
Every 300 working hours
Once a week
Once a year
Whenever sewage enters or when
inactive for a long time
Once a year or for prolonged
inactivity
Once a month
Once a month
Once a month
instruction manual
pag. 57
Publicidad
