battioni Pagani MEC Serie Manual De Instrucciones De Uso Y Mantenimiento página 74

instruction manual
for use and maintenance serie MEC, STAR
11.3.4 BLADES SIZES
Blades
MODEL
NUMBER
MEC 1000 5
MEC 1600 5
MEC 2000 7
MEC 3000 7
MEC 4000 7
MEC 5000 7
MEC 6500 7
MEC 8000 7
MEC 5000 S.C. 5
MEC 6500 S.C. 5
Table 9
IMPORTANT: check that blades received as spare parts have a length lower or equal to nominal measure
stated under our Table 9. Use only original Battioni Pagani
11.4 REPLACEMENT OF RUBBER BALL
1. Unscrew and raise the valve-holder cover (STAR series) or the manifold (MEC series);
2. Replace the rubber ball;
3. Re-fit the valve-holder cover (STAR series) or the manifold (MEC series).
11.5 REPLACEMENT OF GEARS (version /M - MA and /K - KA)
1. Unscrew the screws of the gearbox cover;
2. Use two screws for screwing into the threaded extraction holes until the cover is removed;
3. Take out the gear with splined shaft using an extractor if necessary;
4. For the pinion: unscrew the self-locking nut, use an extractor.
pag. 56
Blades SIZE MODEL
120x38x6,5 MEC 8000 S.C.
190x38x6,5 MEC 9000
180x41x6,5 MEC 11000
240x41x6,5 MEC 13500
300x41x6,5
MEC 16500
300x46,5x6,5 MEC 9000 S.C.
370x46,5x6,5 MEC 11000 S.C.
450x46,5x6,5 MEC 13500 S.C.
299x46,5x9,7 STAR 60
369x46,5x9,7 STAR 72
STAR 84
Blades
Blades SIZE
NUMBER
5 449x46,5x9,7
5 300x60x6,5
5 370x60x6,5
5 460x60x6,5
6 460x67x7,5
5 299x60x9,7
5 369x60x9,7
5 459x60x9,7
6 350x70x7,5
6 400x70x7,5
6 480x70x7,5
palettes.
®