Publicidad
Idiomas disponibles
Idiomas disponibles
Smoker Settings Menu
Auger
This setting is used to prime the pellet feeding system.
NOTE: The auger priming process only needs to be performed before first use, or whenever the
hopper has been completely emptied of pellets. As a general guideline, if the auger is visible at the
bottom of the hopper, the auger should be primed after loading pellets in the hopper.
To prime the auger, first ensure that the waste bin is empty and completely dry.
Press the [Settings] button and rotate the dial to navigate to the "AUGER" option. Press the dial to
select. Then press the dial again to begin the auger priming process. The auger will operate for 90
seconds before automatically shutting off. During this time, some unused pellets may be ejected into
the waste bin. These pellets may be returned to the hopper.
Brightness
This setting is used to adjust the brightness of the display.
To adjust the brightness, press the [Settings] button and rotate the dial to navigate to the
"BRIGHTNESS" option. Press the dial to select. Then rotate the dial to change the display brightness
between LOW, MEDIUM, or HIGH. Press the dial again to confirm the desired setting.
Sound
This setting is used to adjust the volume of the sounds emitted by the smoker.
To adjust the volume, press the [Settings] button and rotate the dial to navigate to the "SOUND"
option. Press the dial to select. Then rotate the dial to change the volume level between LOW,
MEDIUM, HIGH, or OFF. Press the dial again to confirm the desired setting.
Units
This setting is used to toggle the displayed temperature units between Fahrenheit and Celsius.
To switch temperature units, press the [Settings] button and rotate the dial to navigate to the "UNITS"
option. Press the dial to select. Then rotate the dial to switch between Fahrenheit ("SELECT F") and
Celsius ("SELECT C"). Press the dial again to confirm the desired setting.
Info
This setting is used to display the current firmware version installed on the smoker. You may be asked
to provide this information when contacting Customer Service.
Reset
This setting is used to restore the default values for the presets list "PRESETS ONLY" or perform a
complete factory reset "FACTORY RESET" of the appliance.
To restore preset default values, press the [Settings] button and rotate the dial to navigate to the
"RESET" option. Press the dial to select. Rotate the dial until "PRESET ONLY" is displayed. Then press
the dial to confirm.
NOTE: If the default values of the presets have been adjusted and smoked with, the adjusted value
will save to the designated preset. Use this setting option to restore default values.
To perform a factory reset, press the [Settings] button and rotate the dial to navigate to the "RESET"
option. Press the dial to select. Rotate the dial until "FACTORY RESET" is displayed. Then press and
hold the dial for three seconds to complete the reset.
23
49-9000057 Rev. 1
Publicidad
