Descargar Imprimir esta página

GE Profile P9SBAAS6VBB Manual Del Usuario página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING
• Remove all packaging materials before operating the appliance to prevent ignition of these
material. Be sure to remove any packing materials found inside the smoke chamber, including on
the ceiling of the smoke chamber..
• When operating the appliance, maintain a minimum of 4 inches (102 mm) of clearance on left and
right sides of the appliance.
• Do not use or store any flammable or combustible materials on, inside, or near the appliance.
• To reduce the risk of fire, do not place any heating or cooking appliance beneath the appliance.
• To reduce the risk of fire, do not store anything directly on top of the appliance surface when the
appliance is in operation.
• Always replenish the waste bin with clean water before each use. The water ensures that the hot,
used wood pellets are properly extinguished.
• Keep the appliance clean in accordance with the cleaning guidelines described in this manual.
Failure to properly clean and maintain the smoker may result in grease fires.
• Always operate the appliance with the drip pan installed to collect fat and grease that may drop
from the food. Clean the drip pan thoroughly after each use.
• Whenever possible, place food in the center of racks to ensure grease and fat drippings are
captured by the drip pan.
• Do not place flammable substances inside of the smoker, such as alcohol or gasoline.
WARNING
• To protect against electrical shock, do not immerse cords, plugs, or appliance in water or any other
liquid.
• Unplug the appliance from the power outlet when not in use. To unplug, grasp the plug and pull
from the outlet. Never pull from the power cord.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or
has been damaged in any manner. Disconnect appliance from power supply and have serviced by a
qualified technician. See page
• Use only a 120V, 60 Hz standard electrical supply that is properly grounded in accordance with the
National Electric Code and local codes and ordinances.
• Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts
involving a risk of electrical shock.
READ AND SAVE THESE INSTRUCTIONS
49-9000057 Rev. 1
FIRE RISK
ELECTRIC SHOCK RISK
35
to schedule service.
7

Publicidad

loading