Microline Surgical 200-006R Manual De Servicio página 6

2.0 Introduction
Device Description
The Model 200-006R Universal Power Supply (UPS) is a non-sterile, reusable, AC powered unit intended to be used only with
Microline Cautery Instruments and PowerPack Footswitch. The UPS is intended to be connected to AC power via a grounded
hospital grade power cord and features an on/off switch and green power-on LED indicator. Depending on the device used, up to
three operating heat ranges are available from the UPS with corresponding tones indicating the power level of the instruments
heating element. A low frequency tone indicates the use of low heat. An interrupted low tone indicates the use of variable heat, and
a higher frequency continuous tone indicates the use of high heat levels. If the instrument does not require the use of the
PowerPack Footswitch, the UPS will supply power at the variable heat level only, unless a multiheat range device is used. The UPS
may be placed on a flat non-sterile surface adjacent to the sterile field, or may be suspended from a nearby IV pole. If suspended
from an IV pole, the UPS may be rotated to face the user.
Device Features
Universal Power Supply
1-Hanger
2-Volume LED Indicators
3-Volume Control Buttons
4-Footswitch Connector Receptacle and Indicator
5-AC Connector Receptacle
6-Power On LED Indicator
7-On/Off Switch
8-Cautery Instrument Connector Receptacle and indicator
9-Power Level Control Buttons
10-Power Level LED Indicators
3.0 Description of Functions
User Interface
The UPS speaker volume may be set to one of four volume levels via the touch buttons on the UPS front panel.
•
• The UPS power level may be set to one of eight (1 – 8) power levels via the touch buttons on the UPS front panel.
Touch Button Name
Volume Control Up
Volume Control Down
Power Level Up
Power Level Down
Function/Description
Increment UPS speaker volume
Decrement UPS speaker volume
Increment UPS power level
Decrement UPS power level
Page 6 of 142