Microline Surgical 200-006R Manual De Servicio página 7

Indicator Lights
The indicator lights shown below are located on the UPS front panel.
Indicator Light Name
UPS Volume Level
UPS Power Level
Power
Footswitch
Instrument
4.0 Technical Specifications
Overall Dimensions
12.25" x 5.5" x 3" [31.11 cm x 13.97 cm x 7.62 cm]
•
Weight
3 lbs [1.36 kg]
•
Electrical Input/Output Specifications
• Input:
Maximum Output:
•
• Maximum No Load Output Voltage:
Degree of Protection Against Electric Shock:
•
• Class of Protection Against Electric Shock:
Recommended Environmental Conditions
Transport
-15ºC to 40ºC
10 to 95
700hPa to
1060hPa
The UPS is rated to operate at an altitude ≤ 2000 m.
Function/Description
Green illuminated indicator displays the current UPS volume level
(Highest, shown at top to Lowest, shown at bottom).
Blue illuminated indicator displays the current UPS power level
(1 to 8).
Illuminated (green) indicates power switch is on.
For footswitch activated devices, flashing yellow indicates that the
footswitch is required for instrument use. Plug in the footswitch
connector and green illumination indicates the footswitch is
connected and detected.
For fingerswitch activated devices, flashing yellow indicates that a
footswitch is detected and needs to be disconnected.
Green illumination indicates the connected device is recognized as
a Microline Thermal Cautery instrument and is properly connected.
100-240 V~, 50/60 Hz, 150 VA
60 W
9 Volts Direct Current (V.D.C.)
Type BF applied part consisting of Microline Thermal Cautery forceps and
ligating shears.
Class 1
Storage Operating
-15ºC to 35ºC 15ºC to 35ºC
10 to 93 30 to 93
700hPa to 700hPa to
1060hPa 1060hPa
Page 7 of 142