HOLZMANN MASCHINEN D460FXL 230 V Manual De Instrucciones página 34

• A damaged or tangled cable increases the risk of electric shock. Handle the cable with
care. Never use the cable to carry, pull or disconnect the machine. Keep the cable away
from heat, oil, sharp edges or moving parts.
• Proper plugs and sockets reduce the risk of electric shock.
• Water entry into the machine increases the risk of electric shock. Do not expose the
machine to rain or moisture.
• The machine may only be used if the power supply is protected by a residual current
circuit breaker.
• Before connecting the machine always make sure that it is switched off.
• Use the machine only when the ON-OFF switch is in good working order.
12.6 Special safety instructions for this machine
• Never reach into the running machine!
• Never open covers or safety devices when the machine is running.
• Do not wear safety gloves when working (rotating parts).
• Remove chips and workpieces when the machine is at a standstill.
• Never brake the machine by hand when it is running down.
• Never take measurements on rotating workpieces.
• Always machine unshaped workpieces at low spindle speed to a round shape.
• Only work on safely clamped workpieces.
• Before clamping the workpiece between two centers, provide it with a centring hole on
both sides.
• Remove nails and other foreign substances from the workpiece before machining.
12.7 Hazard warnings
Residual risks
Despite intended use, certain risk factors cannot be completely eliminated:
• Risk of injury to hands/fingers from freely rotating workpiece during operation and
overrun until the machine comes to a complete standstill.
• Risk of injury from contact with moving machine parts.
• Risk of injury from sharp edges of the workpiece.
• Risk of injury from contact with live components.
• Risk of injury due to tipping of the machine.
• Risk of injury to hands or eyes from wood splinters.
• Risk of injury due to incorrect installation of the tool or ejection of tool inserts.
• Risk of injury due to dust emissions from workpieces treated with harmful agents.
• Risk of injury to the eye from flying parts, even with protective goggles.
• Risk of injury from kickback due to the tool.
Hazardous situations
Due to the design and construction of the machine, hazardous situations may occur which are
identified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
A safety instruction of this type indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
HOLZMANN MASCHINEN GmbH
D AN G E R
WAR N I N G
www.holzmann-maschinen.at
SAFETY
34
D460FXL_230V