Publicidad
Idiomas disponibles
Idiomas disponibles
A safety instruction designed in this way indicates a possibly hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical
aptitude/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends on you!
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging
regarding center of gravity, slinging points, weight, means of transport to be used and
prescribed transport position, etc.
Transport the machine in its packaging to the place of installation. Ensure the correct body
posture when lifting, carrying and setting down the load.
Lifting/Setting down
-
When lifting/setting down, ensure that you are standing firmly (legs hip-width).
-
Lift/set down load with knees bent and back straight.
-
Do not lift/set down load with a jerk.
Carrying
-
Carry load with both hands as close to body as possible.
-
Carry load with straight back.
-
When transporting the assembled machine, ensure to lift it only by the machine body
and not by the attachments.
If you transport the machine with a vehicle, ensure that the load is secured appropriately!
ASSEMBLY
14.1
Preparation
Delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or
missing parts to your dealer or the shipping company immediately. Visible transport damage
must also be noted immediately on the delivery note in accordance with the provisions of the
warranty, otherwise the goods are deemed to have been properly accepted.
Requirements for the installation site
The chosen installation site must ensure a suitable connection to the electrical power supply
and have a connection to the extraction system. The installation site must meet the required
safety regulations and ergonomic operating conditions, such as lighting, space requirements
and working position. Place the machine on a level solid base with appropriate load-bearing
capacity for machine and workpiece. When dimensioning the required space, take into account
that the operation, maintenance and repair of the machine must be possible without restriction
at all times.
HOLZMANN MASCHINEN GmbH
C AU TI O N
N O TE
www.holzmann-maschinen.at
TRANSPORT
35
D460FXL_230V
Publicidad
