Publicidad
Idiomas disponibles
Idiomas disponibles
• This appliance is intended for domestic refrigeration use only.
3. INSTALLATION
• Follow the installation rules described in this manual.
• Unpack the appliance. Remove all labels from the product. Check that the product is in good
condition. If the appliance is damaged or malfunctioning, do not use it and return it to your
dealer or service centre.
• When handling, use care, do not carry on the front or back of the box, but grasp the left and
right sides, do not lie down to move the box.
• Keep all packaging out of the reach of children. There is a risk of accident if children play with
the packaging materials.
• It is advisable to position the integrated appliance away from possible heat sources, in
particular the sun's rays.
• This appliance is part of a set of elements or installed alone (outdoor kitchen refrigerator
module)
• Do not place the appliance in direct sunlight or near a heat source.
• Do not place the appliance on a soft floor or similar surface. Place the appliance on a flat, solid
surface.
• The feet may include adjustment screws or knobs to balance the unit on an uneven surface.
• The appliance must be connected to a mains socket outlet with a protective earth conductor.
Connection to the mains supply.
• The appliance can be connected via an extension cord or a power strip.
• Place the appliance in a well-ventilated area.
• Do not squeeze the glass door as the glass may break.
Balancing the product
• The appliance must be level to avoid vibrations. To ensure that the appliance is balanced, it
should be positioned vertically and the feet should be in stable contact with the floor. You can
also adjust the level by loosening the appropriate level adjustment on the front (using your
fingers or a suitable spanner).
Electrical connection
CAUTION: All electrical work required for the installation of this appliance must be carried out
by qualified or authorised personnel.
CAUTION: This appliance must be connected to a grounded outlet. The manufacturer accepts no
responsibility for any failure to observe these safety precautions.
Before connecting the appliance to the power source, leave it in an upright position for about
24 hours. This will reduce the risk of the cooling system malfunctioning due to handling
during transport.
- The supply voltage of the devices connected to the mains must cover 230V.
247
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
HE
AR
EN
Publicidad
