cecotec BOLERO DRESSCODE 8800 INVERTER A Manual De Instrucciones página 101

D: STEAM
- Press the button to add a steam wash process after the last water draining step of the
selected wash programme.
- Some wash cycles cannot select the steam wash function. It can only be selected if there
is a steam icon in front of the programme name on the control panel or in the wash cycle table.
E: RINSE
Select the rinse cycle, the rinse time appears on the digital display.
F: DELAY END
Press the button to set the end time of the washing programme.
G: ONE SMART
Press the button to set the "ONE SMART" wash cycle.
H: START/PAUSE
Press and hold the button to start or pause a wash cycle.
Adding laundry during the execution of a washing programme
- Once the wash cycle has started, press, and hold the "START/PAUSE" button again. If the
"DOOR LOCK" indicator light is off
out of the drum.
- To resume the wash cycle from the point where it was interrupted, close the door, and
press the button again.
- WARNING: if the water level or water temperature in the drum is too high, the door lock
indicator light will come on
I: STAINS
- Press the button to select the type of soiling of the laundry, the washing machine will
automatically adjust the most optimal way to remove the soiling.
- Up to 8 types of soiling can be selected.
M: Display (Fig. 14)
1. Temperature indicator light
- When a wash cycle is selected, the default temperature value of this programme will
appear on the display, with the temperature indicator light illuminated.
- You can change the temperature value by pressing the TEMP button. If "- -" is shown on the
display, it means that the washing machine uses cold water only (the internal heating element
for heating water would not be available in this programme).
, the door can be opened, and laundry can be taken in or
and the door could not be opened.
BOLERO DRESSCODE 8800 INVERTER A / INVERTER STEEL A / INVERTER ICE BLUE A
ENGLISH
101