cecotec BOLERO DRESSCODE 8800 INVERTER A Manual De Instrucciones página 107

Steam function
Press the "STEAM" button to add a steam wash process after the last water drain stage of the
selected (or ongoing) wash cycle and before the last spin. In the steam washing process, the
machine generates a large amount of high temperature steam which penetrates deep into the
fabrics, improving their softness and elasticity and, at the same time, eliminating unpleasant
odours and refreshing the laundry. After the steam washing process, the machine enters the
final stage of rinsing and spinning.
Wool
- Cycle designed for woollen garments.
- Before washing, confirm that the garment is labelled "machine washable."
- After completing the procedure, take out the laundry quickly, shape it and dry it to avoid
deformation caused by being placed in the drum for a long time.
- To avoid damage to the laundry, the water temperature should not exceed 40 °C.
- For best results and to reduce damage to the laundry, use a special detergent for wool and
do not exceed 1.0 kg of laundry.
IMPORTANT: after use, confirm that the garments have not been damaged or shrunk.
Delay End
- After selecting the wash programme, press the Delay End button repeatedly to set the
programme end time, which is incremented in one-hour intervals, up to a maximum of 24
hours. After selecting the desired wash programme, but before pressing the START/PAUSE
button, press the Delay End button until the desired time is displayed, e.g., 8 h, with the Delay
End indicator light on.
NOTE: the cycle time is included in the set deferred end time.
- Example of a cycle time of 1 hour and 30 minutes and a delayed end time of 8 hours.
- 8 h is shown on the display and a countdown (approx. 6 hours and 30 minutes) until
the wash cycle starts, then the cycle duration 1: 30 is shown and starts. The total time is
approximately 8 hours.
- The way to cancel the deferred termination function is as follows:
- Turn the wash cycle knob to reset the wash cycle. The Delay End indicator light will go out
and the display will stop showing the delay completion time.
NOTE:
The actual end time of the wash cycle may be different from the set delayed end time,
depending on multiple factors such as water supply pressure, drainage, type of laundry, water
temperature, as well as other conditions.
BOLERO DRESSCODE 8800 INVERTER A / INVERTER STEEL A / INVERTER ICE BLUE A
ENGLISH
107