Descargar Imprimir esta página

cecotec BOLERO DRESSCODE 8800 INVERTER A Manual De Instrucciones página 117

Lavadora de carga frontal

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
The water level is too
low when the machine is
washing
Overfilling of water during
operation of the wash
cycle
Too much foam in the
drum or foam overflows
from the detergent
dispenser
The high-speed spin must
be repeated many times
(spinning).
Machine does not spin
The machine vibrates a lot
during the spin cycle
Spinning result is not
optimal
This is not an issue. The water consumption in the wash
cycle of this appliance is relatively small, the water level in
the wash cycle is lower than that of other types of washing
machines.
If the water level drops, the machine will automatically
recover the water.
When the amount of laundry to be washed is too large, the
appliance can automatically fill the water several times
during the operation of the wash cycle.
The detergent is not suitable for machine washing (must
show the text "for washing machines" or "hand and machine
wash" or similar).
Too much detergent was used; less detergent is required in
soft water.
Due to different types and materials of laundry, the load
balancing system of the appliance may wobble and scatter
the laundry many times to extend the spin time. This is a
normal phenomenon, not an incidence of the machine.
No spin speed has been selected. The control panel displays
"—"
The legs have not been adjusted, causing the machine to rock.
New installation: the transport screws, including the plastic
spacer, or the polystyrene packaging, has not been removed
when installing the machine.
The appliance is trapped between furniture and/or walls.
The load is slightly unbalanced, and the device is rotating, but
at a slower speed.
When you wash less laundry, such as a pair of jeans, a
jumper, a bath towel, etc., the machine may not complete the
spin process due to balance protection.
If the load is slightly unbalanced, the appliance will spin, but
at a lower speed, not at the cycle's default spin speed or the
spin speed setting for the cycle.
BOLERO DRESSCODE 8800 INVERTER A / INVERTER STEEL A / INVERTER ICE BLUE A
ENGLISH
117

Publicidad

loading