Snapper RTX102 Manual Do Utilizador página 102

PROBLEM
A "SCREECHING"
Worn out or damaged belts, guide or
SOUND IS MADE
tensioning pulleys
WHEN TRAVELLING
Damaged or deformed belt pulleys
The travel drive belt is damaged
EXTREME VIBRATIONS
OCCUR WHEN
TRAVELLING
Travel belt is loose
Unbalanced mowing blades
PROBLEM
The travel drive belt is insufficiently
tensioned
The travel drive belt is damaged or
THE TRAVEL DRIVE
worn out
BELT OF THE MOWER
The engine belt pulley or transmission
IS SLIPPING
belt pulley is damaged.
The clutch mechanism is blocked by
a foreign object
THE TRAVEL DRIVE
The travel drive belt is insufficiently
BELT OF THE MOWER
tensioned
IS CREAKING
The travel drive belt is insufficiently
tensioned
The route of the travel drive belt is
incorrect
THE TRAVEL DRIVE
BELT JUMPS OUT
Damaged belt pulleys
DURING OPERATION
Large gap in the travel clutch
mechanism
The space between the segment and
THE STEERING IS
the pinion is too great
SLIPPING THROUGH
OR LOOSE
Worn out ball and socket joints
PROBLEMS WITH TRAVEL
POSSIBLE CAUSES
BELT PROBLEMS
POSSIBLE CAUSES
102
REMEDY
► Check the condition of the belts and the tensioning
pulleys. If the problem persists, immediately contact
an authorised service centre.
► Check the condition of the belt pulleys. Replace them
if necessary.
► Check whether the belt has any burned spaces or
other irregularities. Replace it if necessary.
► Check the tension of the belt (
necessary.
► Check that the mowing blades are balanced. Balance
or replace them if necessary.
REMEDY
► Check the tension of the belt and tension it if
necessary (
6.3.12).
► Check the condition of the belt and replace it if
necessary.
► Check its condition and replace it if necessary.
► Check the clutch and remove any foreign objects.
► Check the tension of the belt and tension it if
necessary ( 6.3.12).
► Check the working order of the brake. If it is not
in proper working order, have it adjusted at an
authorised service centre.
► Check the tension of the belt and tension it if
necessary ( 6.3.12).
► Check the route of the belt. Adjust if necessary.
► Check whether the pulleys are damaged. Replace
them if necessary.
► Check the gap of the travel clutch mechanism.
Deviations may result in the clutch bearing holder
being bent out of shape. Replace it if necessary.
► Check that the space between the pinion and the
segment is not too large. If yes, adjust the cogged
segment.
► Check for wear on the ball and socket joints. Replace
the joints if necessary.
6.3.12). Replace it if