Snapper RTX102 Manual Do Utilizador página 85

(15) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing, the lever must be set to position 7.
(16) GRASS CATCHER DUMP LEVER HANDLE
The lever serves to empty the grass catcher.
(17) / (18) BYPASS LEVER – FREE MOVEMENT OF THE REAR WHEELS
The bypass lever serves to disengage the transmission for the rear wheel drive and is used to push or pull the mower without using
the engine. Depending on the type of transmission used, it is located either in front of the rear left wheel or behind the rear left wheel.
It has these positions:
(19) FULL GRASS CATCHER FLAP
(20) SPRING FOR RETAINING THE GRASS CATCHER IN POSITION WHEN TRAVELLING IN TERRAIN
The lever has 7 work positions, which correspond to a mowing height of 2.5-8 cm.
The higher the number of the lever position, the higher vegetation height remains after
mowing.
More information 5.6.
Lever position
[0] – Lever extended
[1] – lever retracted
Indicates that the grass catcher is full.
Retains the grass catcher in position when travelling across uneven terrain.
85
Rear wheel drive
For pushing the mower,
DISENGAGED
When driving, the
ENGAGED
engine is running
Use
the engine is off