Publicidad
Idiomas disponibles
Idiomas disponibles
3.6.3 FILLING THE FUEL TANK WITH FUEL
For safety reasons the riding mower is transported without fuel and before the first start up it is necessary to fill it up. The fuel tank is
located under the front hood and has a capacity of 8 l of fuel.
Use only petrol with the octane number specified in the user's manual of the engine. Defects caused by the use of
incorrect fuel are not covered by the warranty!
Only fill the fuel tank with the engine turned off and when the engine is cold. Fill up the fuel tank in a well ventilated
location.
When handling fuel, do not eat, smoke or use an open flame.
For filling, use a funnel designed for refilling fuel.
Ensure that fuel is not spilled when refilling. Spilled fuel can very easily catch on fire. If fuel does spill, thoroughly wipe
dry.
Store fuels out of the reach of children.
Procedure for filling up:
Open the fuel tank cap. Open it slowly because there may be overpressure in the fuel
tank caused by petrol vapours.
Insert a funnel into the fuel tank opening and start to pour the fuel from the canister.
After filling up the fuel tank always wipe dry the area around the fuel tank opening as well
as the fuel tank opening itself. It is good to check the condition of the fuel lines.
It is recommended to regularly also clean out the actual fuel tank because impurities found
in the fuel may cause an engine malfunction.
3.6.4 CHECKING THE AIR PRESSURE IN THE TYRES
Before putting the mower into operation, check the air pressure in the tyres.
The air pressure in the front and rear tyres must be in the range 80 - 140 kPa. The
difference between the individual tyres may be ± 10 KPa.
Do not exceed the maximum pressure marked on the tyres that are being used.
3.7 MOWER DOCUMENTATION
The mower is supplied with the following documentation:
- Packaging note
- User's manual
- User's manual for the engine
- User's manual for the battery
- Customer contacts guide
80 - 140 kPa
70
MAX
Publicidad
