Snapper RPX102 Manual Do Utilizador página 93

9. DISPOSAL OF THE MOWER
After the operational life of the mower is over, the owner of the mower is responsible for its disposal. This may be
performed in two ways:
a) Hand the machine over to an authorised company (scrap yard, secondary waste collection point, etc.). You will
receive documented confirmation of the handover for disposal.
b) Dispose of the machine yourself. In this case we recommend the following procedure:

Dispose of the product utilising recyclable material according to the applicable waste disposal law.

Disassemble the entire machine.

Parts that can be reused should be cleaned, preserved and stored for further use.

Sort the remaining parts into those that are and are not environmentally friendly, e.g. rubber parts (gaskets),
lubricant remains in the bearings or on gears. The environmentally harmful components must be handled
according to the relevant waste disposal law applicable in the country of the user, e.g. in the Czech Republic it
is the Waste Act No. 185/2001 Coll.

Sort the waste according to the Wastes Catalogue in accordance with the relevant ordinance. Ecologically friendly waste shall
be treated as reusable material.
Old tyre collection (applies only for the Czech Republic)
Old and unused tyres are an ecological waste. Their disposal must be carried out in accordance with national regulations. Authorised
sales and service partners will take back the tyres at the end of their service life either directly within the scope of the take back
program, or will advise you where to hand them over free of charge.
93