Harbor Breeze AR24H-52BN Manual De Instrucciones página 11

FINAL INSTALLATION
CAUTION: Before starting installation,
disconnect the power by turning off the circuit
breaker or removing the fuse at the fuse box.
Turning power off using the fan switch is not
sufficient to prevent electric shock.
NOTE: If the light kit could be wobbled by hand, it
means the light kit is not twisted completely till the
right position. Keep twisting the light kit till it could
not be wobbled by hand.
1. While holding the 20W LED light kit (F)
under the fan motor assembly (E), snap
together the wire connection plugs :
White to white
Black to black
Position the notches on the inner edge of the
20W LED light kit (F) so they match the tabs
on the outside of the rim on the light kit
mounting plate. Carefully lift the 20W LED
light kit (F) inside the light kit mounting plate
and secure it to the fan by turning the 20W
LED light kit (F) clockwise until snug.
3
Notches
11
Light Kit Mounting
Plate
Tabs
Wire Connection
Plugs