Harbor Breeze AR24H-52BN Manual De Instrucciones página 7

INITIAL INSTALLATION
1. Turn off circuit breakers and wall switch to the
fan supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
2. This fan can be mounted as a flushmount on
a regular (no-slope) ceiling only.
Check to make sure blades (C) will be at least
30 in. from any obstruction and at least 7 ft.
above the floor.
3. Remove two of the four mounting plate
screws with lock washers from the mounting
plate (A) and loosen the other two screws with
lock washers. (Do not remove.)
1
2
3
7
30 in.
min.
7 ft.
min.
Screws