Marzocchi BOMBER Z1 Manual Del Usuario página 11

COMPRESSION ADJUSTMENT
REBOUND ADJUSTMENT
Rebound controls the rate of speed at which the fork extends after compressing. The rebound
adjustment is dependent on the air pressure setting. For example, higher air pressures require
slower rebound settings. Use your air pressure to find your rebound setting. The rebound
adjuster is located underneath the damper-side fork leg.
OPEN
(COUNTER-CLOCKWISE)
LEAST AMOUNT OF
REBOUND DAMPING,
FORK REBOUNDS
FASTEST
RAIL COMPRESSION ADJUST
The 2-Position Sweep
Adjust lever is useful to
make on-the-fly adjustments
to control fork performance.
Use the positions between
OPEN and FIRM modes to
fine-tune your compression
damping
.
9 8 7 6
RAIL REBOUND
Turn your rebound knob to the closed
position, clockwise until it stops.
Then turn it counter-clockwise to the
number of clicks shown in the table on
the previous page.
5 4 3 2
11
CLOSED
1
(CLOCKWISE)
MOST AMOUNT OF
REBOUND DAMPING,
FORK REBOUNDS
SLOWEST