Dalbach GS60V-45-01 Manual De Instrucciones página 42

Ersatzteile / Kundenservice
18.4 Changing the washing programme
When the water has run in completely, or the dishwasher detergent has flowed in, a
change of programme is no longer possible without a restart. In this case, fill the
container with dishwasher detergent again. (see chapter "Filling dishwasher detergent").
11. Open the appliance door slightly to interrupt the washing process.
When the spray arms are no longer rotating, open the door completely.
12.
13. Press and hold the programme button for 3 seconds to cancel the programme.
14. Press the "Programme" button and select the desired programme.
15. Press the "Start/Pause" button and the appliance starts the selected programme
after 10 seconds.
18.5 Interrupting the washing programme
You can put in a forgotten piece of cutlery as long as the cleaner container has not yet
opened.
16. Press the "Start/Pause" button to interrupt the washing process.
17. Wait 5 seconds and then open the appliance door.
18. Adjust forgotten dishes.
19. Close the appliance door.
20. Press the "Start/Pause" button and the appliance starts the selected programme
after 10 seconds.
18.6 End of the washing programme
An acoustic signal sounds for 8 seconds at the end of a washing programme.
APPLIANCE DAMAGE!
Let the appliance cool down a little after the end of the programme (acoustic signal) and
do not open it immediately.
Emptying the dishwasher
In order to prevent water from the upper basket dripping onto the items in the lower
basket, empty the lower basket first, then the upper crockery basket.
Page | 42