Step 6
Remove cap nut and spring from smoke
stack. Place smoke stack damper over
the bolt at the top of the smoke stack.
Then place the smoke stack damper
spring over the bolt and tighten with cap
nut.
Step 7
Insert door into door hinges on left side
of grill body assembly. Attach air shutter
to door using M5 x 14 mm shoulder
bolt and M5 nut as illustrated. Attach
door latch to door using M6 x 12 mm
bolt and M6 nut as illustrated. Then
attach M6 x 14 mm shoulder bolt for
door latch.
Step 8
Insert front shelf in holes on grill body
assembly as illustrated.
7