Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6. Turn the freezer compartment door upside down and
install on the left-hand side using the screws.
7. Now close the freezer compartment door.
8. Remove the pin from the bottom bracket and insert it
into the bracket on the opposite side.
9. Release the pin from the upper hinge, turn the hinge
180° and reinsert the pin.
10. Take the upper hinge and insert the pin into the fixture
of the upper appliance door.
11. Insert the pin of the upper hinge into the pre-drilled
hole of the appliance door and screw everything on the
left side. Check that the appliance door is aligned
horizontally and vertically and that the seals close
properly.
APPLIANCE DAMAGE!
To avoid appliance damage, observe the following:
•
Stand the appliance upright again after swapping the hinges.
•
Check the exact fit of the door seal and the appliance door.
•
Reconnect to the mains power supply after three hours at the earliest.
Page | 40
Publicidad
