CAMPAGNOLA KRONOS 58 Manual De Uso Y Mantenimiento página 34

Product table: listed are the units that, when properly assembled, allow the various combinations of tools
to be made.
1 - Power unit
2.1.1.1. Noise level
Continuous A-weighted sound pressure level at the operator's position (LpA) and sound power level of
the tool (LwA), both measured according to standard UNI EN ISO 3744:
With reference to ISO 3744, the total measurement uncertainty value is assumed to be K = 1.645
2.1.1.2. Vibration level
The frequency-weighted root mean square acceleration value to which the hand-arm system is exposed measured
according to EN ISO 5349-1 and 2:
Tool combinations
1 - 2 - 4
1 - 3 - 4
2.1.1.3. Electromagnetic compatibility level
The machine contains electronic components subject to Electromagnetic Compatibility regulations, affected by
conducted and radiated emissions.
Emission values comply with regulatory requirements through the use of components that comply with the
Electromagnetic Compatibility Directive, suitable connections and installation in accordance with the requirements
of the component suppliers.
The machine therefore complies with the Electromagnetic Compatibility (EMC) directive.
NOTE: For the use of the 1600 mm pole, it is MANDATORY to install the ferrite supplied.
CAUTION: failure to install the ferrite could result in abnormal conducted and radiated emissions.
2.2. General precautions
CAUTION!
Do not use the tool indoors or in classified environments or where a potentially explosive atmosphere is
present.
CAUTION!
The machine is NOT suitable for working in explosive or classified environments
Page 34
Products table
2 - Fixed pole 1200 mm
4 - Fixed pole 1600 mm
Tool combinations
1 - 2 - 4
1 - 3 - 4
Vibration level aheq
EN
Lower handle
5.4 ± 0.9 m/s²
3.4 ± 0.6 m/s²
LwA
102 dB(A)
102 dB(A)
ISO 5349 Vibration level aheq
0310.0360 Use and Maintenance Manual - Translation
of Original Instructions - Rev: 00, Date 07/02/2024
3-4 - Cutting head
ISO 5349
EN
Upper handle
5.3 ± 0.9 m/s²
4.6 ± 0.8 m/s²
.