3.5.
Parts, other than the tool, constituting the package
-
Quick guide.
-
Tool kit.
-
Chain sharpening file.
3.6.
Technical data
•
Bar length:
•
7" bar maximum cut:
•
Cutting chain:
•
Active safety catch:
•
Automatic bar lubrication:
•
Oil tank volume/capacity
•
Battery power supply:
•
Motor:
•
Power:
•
Consumption:
•
No. of cuts with Li-ion 700 battery
•
Speed:
•
Chain speed
•
Two-colour LED:
•
Power button:
•
Complete tool length:
•
Mass/weight tool length 1900 mm:
•
Mass/weight tool length 2300 mm:
•
Degree of protection of the power unit
3.7.
Power source technical data
Power unit with the following technical data:
Output voltage Max 58V Vdc;
Voltage Min 42V Vdc
Direct current supplied min. 30A
Equipped with electronic short-circuit protection system and/or 30A protection fuse
Tool power connector:
Brand: SOURIAU
Model: Push-pull connector UTL6-103G1P
Earth
3.8.
Environmental operating conditions
Unless otherwise specified, the machine is intended for use under the following conditions:
Below 1000m above sea level.
Ambient temperature between 5°C and + 45°C. (24-hour average <= at 35°C)
Relative humidity 30% to 85% without condensation.
Material temperature < 45° C.
3.9.
Storage
The packaged product can normally be stored in a closed environment as long as the temperature is not lower
than -20 °C or higher than +50 °C and the humidity does not exceed 70 %.
No other packages must be placed on top of the packaging.
0310.0360 Use and Maintenance Manual - Translation
of Original Instructions - Rev: 00, Date 07/02/2024
Connector connection diagram
Push-pull connector UTL6-103G1P contacts table
PIN
COLOUR
1
Empty - male contact
2
Black - male contact
3
Empty - male contact
Red - female contact
7"
Ø 150 mm
1/4"
Yes
Yes
50 ml
58 V
Brushless
1200 W
20-25 Ah
Approx. 600 10-cm diameter cuts
6 selectable modes
11.4 m/sec to 14.8 m/sec
green for ignition, red for max. absorption
ON/OFF
1900 mm / 2300 mm
3,750 kg.
4,100 kg
IP 00
SM14ML-1TK6-MOD
SM14ML-1TK6-MOD
SM14ML-1TK6-MOD
SC14ML-1TK6-MOD
Contact
Page 41