Publicidad
Confirmation and Exit Power Management Function
After select power limit value, use power off key
Timer control
• You can set it to turn one or more cooking zones off after the set time is up.
• The maximum timing time is the default running time of the current running level, please refer to Default
working times table.
Setting the timer to turn cooking zones off Set
one zone
Touching the heating zone slider control.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time.
Set more zones:
The steps for setting more zones are similar to the steps of setting one zone; The
timing of each heating zone is independently set and displayed
The show as below:
Cancel the timer
The timing time of the operation correspond-ing
to the heating zone to 0:00.
NOTE
1) The manual timing setting cannot exceed the default timing time of the stove head. If the current level value is
reduced after the maximum timing time is set, the timing time will automatically change to the default maximum
time of the current level when the timing time is greater than the default closing time of the current level.
2) Under the timing display state, click the slider once to view the current heating level. After entering the display
mode of level, click or slide the slider to set the level
for confirmation. Then the hob will be turned off.
Set the time by touching the or control of the timer.
Hint: Touch the "-" or "+" control of the timer once will
decrease or increase by 1 minute. Touch and hold the
"-" or "+"control of the timer will decrease or increase
by 10 minutes.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Touch and hold the timer control " - " and "+" for 1s,
the timer will be cancel.
59
V.1
Publicidad
