Publicidad
Specific Failure & Solution
Failure
The LED does not
come on when unit is
plugged in.
Some buttons can't
work, or the LED
display is not normal.
The Cooking Mode
Indicator comes on,
but heating does not
start.
Heating stops suddenly
during operation and
the display flashes "u".
Heating zones of the
same side ( Such as the
first and the second
zone ) would display
"u" .
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob.
Problem
No power supplied.
The accessorial power board
and the display board
connected failure.
The accessorial power board is
damaged.
The display board is
damaged.
The display board is
damaged.
High temperature of the hob.
There is something wrong
with the fan.
The power board is
damaged.
Pan Type is wrong.
Pot diameter is too small.
Cooker has overheated;
The power board and the
display
board
connected
failure;
The display board of
communicate part is
damaged.
The Main board is damaged.
The fan motor is damaged.
Solution A
Check to see if plug is
secured tightly in outlet and
that outlet is working.
Check the connection.
Replace the accessorial
power board.
Replace the display board.
Replace the display board.
Ambient temperature may be
too high. Air Intake or Air
Vent may be blocked.
Check whether the fan runs
smoothly；if not , replace the
fan.
Replace the power board.
Use the proper pot (refer to
the instruction manual.)
Unit is overheated. Wait for
temperature to return to
normal.
Push "ON/OFF" button to
restart unit.
Check the connection.
Replace the display board.
Replace the power board.
Replace the fan.
69
Solution B
Pan detection circuit is
damaged, replace the
power board.
V.1
Publicidad
