Oregon 410-120 Manual Original De Instrucciones página 14

Preparing for Use
Bench-Mounting
Use two (2) appropriate bolts, complete
with washers and nuts (not supplied),
inserted in the securing holes Make sure
you position the base unit hanging over the
edge of the bench as shown in the detail
Assembly
Securing the Operating Handle
–Insert the nut (D) into the handle (E)
– Insert the bolt (C) into the slot (1)
– Completely screw the operating handle (E)
onto the bolt (C)
14
Wall-Mounting
NOTE: Assemble the upper housing / motor unit (A)
to the base unit (B) before mounting to your wall
Use four (4) appropriate bolts,
complete with washers (not supplied),
inserted in the securing holes
410-120