Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Grinding Wheel Dressing for Setting the Depth Gauge
Fit the 1/4" (6,3 mm) thick grinding wheel, following the instructions given on pages 15–17
DO NOT check the grinding wheel shape or dress the grinding wheel as shown on page 17
Turn the vise so that the reference mark (17) is on 0°
Turn the motor unit (A) to take the reference mark
to 80°-75° on the head-tilt angle guide plate (11)
80°-75°
Position the dressing brick (O) on the vise jaws
(14) and against the chain stop (10) Hold the
dressing brick firmly with one hand, keeping
fingers / hands clear of the grinding wheel
28
Start the grinder by turning the switch to position "I"
Lower the motor unit (A) with handle (E)
Grind the wheel against the dressing brick until
you obtain a profile like the one illustrated
WARNING Contact with the grinding wheel
while it spins at high speed may cause burning
and abrasions
410-120
Publicidad
