Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
Safety Information
FOR YOUR OWN SAFETY READ AND
UNDERSTAND THIS OPERATOR'S MANUAL
BEFORE OPERATING GRINDER
Keep this manual for future reference To
ensure the correct use of the grinder and to
prevent accidents, do not start working without
having read this manual carefully The manual
explains how the various components work
and provides instructions for carrying out the
necessary checks and maintenance operations
SAFETY RULES AND PRECAUTIONS
WARNING The use of accessories or
attachments not recommended by the manufacturer
may result in a risk of injury to operator or
bystander Any maintenance operation not
described in this manual must only be carried
out by an AUTHORIZED service center
WARNING Replace cracked or damaged
grinding wheel immediately Serious injury
to operator or bystander could result from a
damaged wheel
CAUTION The following instructions
should be carefully followed in order to
reduce the risk of kickback resulting from
improperly sharpened saw chain
USERS
The grinder must only be used by adults Users
must be in good physical condition and familiar
with the instructions for use
KEEP BYSTANDERS AND CHILDREN AWAY
All bystanders should be kept at a safe distance
from work area
WEAR PROPER APPAREL
Never wear loose clothing, bracelets, neckties, rings,
or any other jewelry that could come into contact
or get caught with the grinding wheel or any other
moving parts Nonslip footwear is recommended
Wear protective hair covering to contain long hair
ALWAYS USE SAFETY GLASSES AND GLOVES
Always wear gloves and protective eyewear
while operating the grinder and while retouching
the grinding wheel using the dressing stone.
Also use face or dust mask if cutting operation
is dusty. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
NEVER STOP THE WHEEL WITH YOUR HANDS
Never attempt to stop the rotation of the grinding
wheel with your hands
6
DISCONNECT TOOLS BEFORE SERVICING
Make sure the plug is disconnected when fitting
or changing the grinding wheel and during any
other operation of maintenance or transport
KEEP GUARDS IN PLACE AND IN WORKING ORDER
Never start the grinder without the wheel
guards in place
REMOVE ADJUSTING KEYS AND WRENCHES
Make sure that keys and adjusting wrenches are
removed from tool before turning it on
DON'T FORCE TOOL
It will do the job better and safer at the rate for which
it was designed Each grinder has a plate indicating:
– Size of arbor: Ø 866" (22 mm)
– No-load speed in revolutions per minute: RPM 3150
– Always read operator's manual before operating
the machine
– Always wear eye and face protection
– Always use the proper grinding wheel
Also make sure that the voltage and frequency
indicated on the plate applied to the grinder
correspond to those of the mains hook-up
REDUCE THE RISK OF UNINTENTIONAL STARTING
Always make sure that the start-up switch is in
the "0" (OFF) position before connecting the plug
to the outlet
NEVER USE CABLES, PLUGS OR EXTENSION
CABLES THAT ARE DEFECTIVE OR NON-STANDARD
See "Minimum Extension Cord Gauges" table
on page 8 Remove the plug from the mains
immediately if the cable is damaged or cut; for cable
repair or replacement, contact your authorized
dealer or service center The power supply cable
is complete with terminals – with protection The
internal electrical connection consists of inserting
the feeding cable terminals directly in the switch
The electrical connection to the mains shall be made
in such a way as to prevent damage by people or
vehicles which could endanger both them and you
KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents Make
sure that the grinding wheel working area is free of
tools or other objects before starting up the grinder
Frequently clean grinding dust from beneath grinder
DON'T USE IN DANGEROUS ENVIRONMENTS
Don't use power tools in damp or wet locations or
expose them to rain Keep work area well-lighted
410-120
Publicidad
