Operating Instructions; Sharpening The Chain - Oregon 410-120 Manual Original De Instrucciones

Operating Instructions

Operating Instructions

Sharpening the Chain

– Wear personal protective equipment
– Sharpen all the cutters on the same side and then adjust the vise as explained in
the previous sections, and sharpen the cutters on the opposite side
– When grinding is complete, ensure all cutter top plates equal length
A
Make sure the vise handle (13) has been pulled to
the right, the vise jaws (14) are tight, and the cutter
is blocked (10) properly
26
A=B
B
Start the grinder by turning the switch to
position "I"
Sharpen the cutter by lowering the grinding
wheel with handle (E)
410-120