Publicidad
Idiomas disponibles
Idiomas disponibles
410-120
For Left-hand Cutters without a Down Angle (0°)
Once you have established the type of chain to be sharpened, look up the adjustment angles
(vise, down and head tilt angles) in the "Grinding Angles Chart" on page 12 (columns A/B/C)
NOTE: if your chain has a down angle in column B on the "Grinding Angles Chart," please see the
"For Left-Hand Cutters with a Down Angle" section on page 22
Setting the Vise Rotate Angle
Loosen the vise adjustment knob (16)
Turn the vise counter-clockwise
Position the reference mark pointer (17) on the vise
by the desired vise rotate angle
Tighten the vise adjustment knob (18)
Setting the Sharpening Angles
Left-Hand Cutters
Setting the Head Tilt Angle
Loosen the locking knob (H) at the back of the
motor unit (A)
Rotate the entire motor unit (A) until the reference
mark on the edge of the motor unit is positioned
at the desired head tilt angle (11)
Tighten the locking knob (H) at the back of the
motor unit (A)
21
Publicidad
