Publicidad
Idiomas disponibles
Idiomas disponibles
6.1.2 Drying:
6.1.2.a After washing and rinsing all the com-
ponents, shake them to remove excess water
and fit them back on as described in the follow-
ing section REASSEMBLING THE APPLIANCE.
At this point, to remove the water that settles
in the nebulising tray and mesh (2) press but-
1A
ton 1A ( pictured on the side ) and wait for the
appliance to stop nebulising. After that, switch
off the unit.
PUSH
ATTENTION This operation is very important,
because it prevents the deposit of limescale
in the micro-holes of the mesh, which might
impair proper nebulisation in the subsequent
therapeutic application.
6.1.2.b To dry all the components completely,
5
leave them out in a dry place (not in the bath-
2
room, for example) as pictured on the side.
4
3
6.2- Cleaning the Appliance Body
Use a slightly moistened cloth with antibacterial
detergent for cleaning the Appliance Body (1).
Then dry it with a soft paper tissue.
ATTENTION
Do not immerse the Appliance Body (1) in wa-
ter and do not wash it under the tap.
Do not use alcohol to clean the device.
32
Publicidad
