melitta CAFFEO SOLO & milk Manual De Instrucciones página 58

• Turn the valve switch (Fig. A, no. 11) clockwise to the stop to open the
valve.
• The valve symbol
steam pipe.
• When water is no longer dispensed and the symbol for the valve
illuminated, turn the valve switch anti-clockwise to the stop to close the
valve.
→ Subsequently, the standby symbol
illuminated. The device is ready for operation and water hardness is
automatically set to hardness level 1.
Notes
– The Melitta Claris
®
period of time. We therefore recommend storing the Melitta
fi lter in the refrigerator in a glass of water when the appliance will not be in
use for extended periods.
After inserting the Melitta
–
be washed out of the fi lter the fi rst time the appliance is rinsed out. This
can cause the rinse water to appear slightly grey in colour. Subsequently
the water will again be clear.
56
fl ashes. Water will fl ow into the vessel under the
water fi lter should not remain dry over an extended
®
Claris water fi lter, excess active charcoal will
® ®
and bean symbols
Claris
®
is
will be
water
®