melitta CAFFEO SOLO & milk Manual De Instrucciones página 77

Phase 1
During Phase 1, one bean symbol
3 Empty the drip tray and then reinsert it and place the coffee grounds
container under the steam pipe.
→ The symbol for the water tank
4 Lift the lid of the water tank (Fig. A, no. 7) and pull the water tank up
and out of the appliance and then empty it completely.
5 Add the descaling agent (e.g. Melitta
liquid descaler) to the water tank according to the instructions on the
packaging.
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specifi ed on the
descaling agent packaging.
6 Reinsert the water tank.
7 Press the button for steam dispensing
descaling programme.
→ The integrated descaling programme is started. Water fl ows inside
the appliance into the drip tray in multiple intervals. This process lasts
approximately 15 minutes. Then the valve symbol
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols
8 Ensure that the coffee grounds container is placed under the steam
pipe.
9 Turn the valve switch (Fig. A, no. 11) clockwise to the stop to open the
valve.
is shown on the display.
lights up.
ANTI CALC Espresso Machines
®
to continue the integrated
are shown on the display.
illuminates.
75