Preparing Espresso Or Café Crème - melitta CAFFEO SOLO & milk Manual De Instrucciones

7 Preparing espresso or café crème
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 54).
• Place one or two cups beside each other under the outlet.
• Press the button for coffee strength
• Turn the coffee quantity regulator (Fig. A, no. 4) to adjust the dispensed
quantity.
• Press the button for coffee dispensing
prepare one cup.
• Press the button for coffee dispensing
if you want to prepare two cups.
→ If you have pressed twice, the bean symbols fl ash twice in rapid succession
during dispensing to confi rm.
→ The (double) grinding process and the dispensing of coffee start. The
standby symbol
dispensed quantity is reached.
• To interrupt coffee dispensing, press the button for coffee dispensing
. If you have pressed twice, wait for at least three seconds after
starting dispensing before pressing the button again.
Notes
– When the appliance is started up for the fi rst time, the grinder will grind
longer than usual.
– You can also adjust the dispensed quantity during the dispensing process.
To dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. To
dispense more coffee, turn the regulator to the right.
is fl ashing. Dispensing ends automatically when the set
to adjust the coffee strength.
once if you want to
twice in rapid succession
57