Chattanooga Intelect Transport 2 Manual Del Usuario página 19

WAVEFORMS (CONTINUED)
VMS™
VMS is a symmetrical biphasic waveform with a 100 sec interphase
interval. Because the pulse is relatively short, the waveform has a low skin
load, making it suitable for applications requiring high intensities, such as
in muscle re-education protocols.
Output Mode
Available on Channels
Treatment Time (Stim)
Treatment time (Combo)
Mode Selection
Output Intensity
Anti-Fatigue
Channel Mode
Cycle Time
Frequency
Phase Duration
Ramp
Set Intensity Individual/both Channel Intensity Setting in
IRMS
DC component
MICROCURRENT
Microcurrent is a monophasic waveform of very low intensity.
Output Mode
Available on channels
Treatment Time
Mode Selection
Output Intensity
Duty Cycle
Frequency
Polarity
IRMS
DC component
Electrodes
1, 2
1-60 min
1-30 min
CC or CV
0- 140 mA (CC) 0-140 V (CV)
Off or On
Single, Reciprocal, Co-Contract
Continuous or User Defined
1-200 pps
30-1,000 sec
0-5 sec
Reciprocal and Co-Contract modes
0-50 mA
No
Electrodes
1, 2
1-60 min
CC
0-1,000 A
50%
0.1-1,000 pps
Positive, Negative, or Alternating
0-1mA
No
HIGH VOLTAGE PULSED CURRENT (HVPC)
The High Voltage Pulsed Current (HVPC) has a very brief pulse duration
characterized by two distinct peaks delivered at high voltage. The waveform
is monophasic (current flows in one direction only). The high voltage causes
a decreased skin resistance making the current comfortable and easy to
tolerate.
Output Mode
Available on Channels
Treatment Time (Stim)
Treatment Time (Combo)
Mode Selection
Output Intensity
Cycle Time
Display
Frequency
Polarity
Ramp
Sweep time
Sweep High Frequency
Sweep Low Frequency
IRMS
DC component
TENS- ASYMMETRICAL BIPHASIC
The Asymmetrical Biphasic waveform has a short pulse duration. It is
capable of strong stimulation of the nerve fibers in the skin as well as of
muscle tissue. This waveform is often used in TENS devices. Because of
its short pulse, the patient typically tolerates the current well, even at
relatively high intensities.
Output Mode
Output Intensity
Available on Channel
Treatment Time (Stim)
Treatment Time (Combo)
Mode Selection (Stim)
Mode Selection (Combo)
Amplitude Modulation
Burst Frequency
Cycle Time
Frequency
FrequencySweep
Phase Duration
Sweep time
Sweep Low Frequency
Sweep High Frequency
IRMS
DC component
SYSTEM 19
Electrodes
1, 2
1-60 min
1-30 min
CV
0-500 V (CV)
Continuous or User Defined
Volts
1-200 pps
Positive or Negative
0.5-5 sec
14sec
2-200 pps
1-199 pps
0-45mA
0-1.5mA
Electrodes
0-140 mA (CC) 0-140 V (CV)
1, 2
1-60 min
1-30 min
CC or CV
CV
0% (off) to 100% on 10% steps
0-10 bps
Continuous or User Defined
1-200 pps
On/Off
30-400 sec
14 sec
1-199 pps
2-200 pps
0-50mA
No