Publicidad
Idiomas disponibles
Idiomas disponibles
34
OPERATION
CREATING A USER PROTOCOL FOR
ULTRASOUND THERAPY
To create User Protocols for ultrasound therapy, do the
following:
1.
On the Home screen, press the Up and Down Arrow buttons
to highlight Ultrasound.
2.
Press the Enter button.
The Ultrasound parameter screen displays.
3.
On the parameter screen, press the Up and Down Arrow
buttons to highlight the parameter you want to change and
adjust it accordingly, making sure to press the Enter button
after each adjustment.
4.
Press the Clinical Library button.
The Save Protocol screen displays.
5.
Press the Up Arrow and Down Arrow buttons to highlight
any unused user protocol. If you select the Save as Default
protocol, this will become the protocol displayed when
Ultrasound is selected on the Home screen.
6.
Press the Enter button to accept the highlighted selection
and save your custom protocol.
The User Protocol Confirmation window displays to
indicate that the protocol is now saved as the number you
specified.
7.
Press any button on the Operator Interface.
The Parameter screen displays and your new protocol is
now saved.
47979 INTELECT TRANSPORT 2 COMBO (4778) AND ULTRASOUND (4776) USER MANUAL
CREATING A USER PROTOCOL FOR
COMBINATION THERAPY
To create User Protocols for ultrasound therapy, do the
following:
1.
On the Home screen, press the Up and Down Arrow
buttons to highlight Combo.
2.
Press the Enter button.
The Ultrasound parameter screen displays.
3.
Press the Up and Down Arrow buttons to highlight
Waveform.
4.
Press the Enter button.
The Waveform menu displays.
5.
Press the Up and Down Arrow buttons to highlight the
appropriate waveform.
6.
Press the Enter button to accept the selection.
The Waveform menu closes.
7.
Press the Up and Down Arrow buttons to highlight
Edit Stim.
8.
Press the Enter button to accept the selection.
The waveform's parameters display.
9.
Press the Up and Down Arrow buttons to highlight the
parameter you want to change and adjust it accordingly,
making sure to press the Enter button after each
adjustment.
10. Press the Up and Down Arrow buttons to highlight Edit
Ultrasound.
11.
Press the Enter button to accept the highlighted selection.
The Ultrasound parameter screen displays.
12. Press the Up and Down Arrow buttons to highlight the
parameter you want to change and adjust it accordingly,
making sure to press the Enter button after each
adjustment.
EN
Publicidad
