Publicidad
Idiomas disponibles
Idiomas disponibles
CREATING A USER PROTOCOL FOR ELECTROTHERAPY
This is a library you create. You may store up to 15 protocols
in the User Protocol Library. To create User Protocols for
electrotherapy, do the following:
1.
On the home screen, press the Up and Down Arrow buttons
to highlight either Stim Channel 1 or Stim Channel 2.
2.
Press the Enter button.
NOTE: User protocols can be used on any channel (Stim
Channel 1, Stim Channel or Ultrasound). It does not matter
on which channel they are created.
The Select Waveform screen displays.
3.
Use the Up and Down Arrow buttons to highlight the
appropriate waveform.
4.
Press the Enter button.
The Parameter screen displays.
5.
On the parameter screen, press the Up and Down Arrow
buttons to highlight the parameter you want to change and
adjust it accordingly, making sure to press the Enter button
after each adjustment.
6.
Press the Clinical Library button.
The Save Protocol screen displays.
7.
Press the Up Arrow and Down Arrow buttons to highlight
any unused user protocol. If you select the Save as Default
protocol, this will become the protocol displayed when the
waveform is selected on the Waveform screen.
8.
Press the Enter button to accept the highlighted selection
and save your custom protocol.
The User Protocol Confirmation window displays to
indicate that the protocol is now saved as the number you
specified.
9.
Press any button on the Operator Interface.
The Parameter screen displays and your new protocol is
now saved.
OPERATION
33
Publicidad
