Publicidad
Idiomas disponibles
Idiomas disponibles
STARTING, STOPPING, AND INTERRUPTING ELECTROTHERAPY (CONTINUED)
6.
Use the Up and Down Arrow buttons to highlight either
Stim Channel 1 or Stim Channel 2.
7.
Press the Enter button.
The Waveform screen displays.
8.
Use the Up and Down Arrow buttons to highlight the
appropriate waveform.
9.
Press the Enter button.
The Electrotherapy parameter screen displays.
10. Press the Up and Down Arrow buttons to highlight the
parameter you want to change and adjust it accordingly,
making sure to press the Enter button after each
adjustment.
11.
Press Enter to accept the parameters.
The Parameter screen refreshes and the new parameters
are displayed.
12. To begin therapy, press the START button.
The timer counts down, the output power ramps up below
the timer, and "Running" displays below next to the timer.
NOTE: When the therapy time has expired, the unit beeps
three times.
During therapy, you can press the TIME button to raise or
lower treatment time (in one minute increments) using the
up and down arrows.
During therapy, you can press the INTENSITY button to
raise or lower the output using the up and down arrows.
Therapy can be interrupted at any time by pressing the
STOP or PAUSE buttons.
When the STOP button is pressed, the unit stops emitting
output, and the unit returns to the home screen. To resume
therapy, repeat steps 6-11.
During treatment, the following occurs whenever the PAUSE
button is pressed:
• the timer pauses
• the unit beeps quickly 5 times
• "Paused" displays below the timer
• the unit stops emitting output
To resume therapy, press the PAUSE button or the START
button.
13. When you have completed treatment, remove all electrodes
from the patient.
14.
Turn system power "OFF" by pressing the Power On/Off
button. The unit beeps once and the blue light on the Power
On/Off button flashes intermittently.
OPERATION
29
Publicidad
