Chattanooga Intelect Transport 2 Manual Del Usuario página 25

Note: Default settings
NO. Waveform
TENS- 80Hz; cont; 20 min
1 Asymmetrical
Biphasic
80Hz; cont; 20 min
TENS- Symmetrical
2
Biphasic
50Hz;2s ramp; cont;
3 VMS™ 20 min
IFC (Interferential) 4000Hz; 80/150Hz;
4
Traditional (4 Pole) manual; cont; 20 min
IFC Premodulated 2500Hz; 80/150Hz;
5
(Traditional 2 Pole) cont; 20 min
2500Hz; 50Hz; DC
6 Russian
50%; cont; 20 min
High Voltage Pulsed 100Hz; cont; 20 min
7
Current (HVPC)
MONOPHASIC: 1.0ms/500ms; 5 min
8 Monophasic
Rectangular pulsed
MONOPHASIC:
1.0ms/500ms; 5 min
9 Monophasic
Rectangular pulsed
Diadynamic Diadyn settings (fixed),
10
Waveforms 10 min
Träbert settings (fixed),
11 Träbert (Ultrareiz)
10 min
12 Microcurrent Neg; 1Hz; 20 min
GALVANIC: Pos; cont; 10 min
13
Continuous
GALVANIC: Pos; cont; 10 min
14
Interrupted
Default settings
are the same for any
conditions. Please
adjust according to
this table
Use default settings and increase intensity to max tolerable motor level
Use default settings and increase phase duration (denervated muscles) & intensity
to obtain muscle contraction
Use default settings and increase phase duration (denervated muscles) & intensity
to obtain muscle contraction
Muscle re-education
Freq Intensity
muscle
35-80Hz contraction; max
tolerable
muscle
35-80Hz contraction; max
tolerable
muscle
35-80Hz contraction; max
tolerable
SYSTEM
Duty cycle Treatment Time
1:5 to 1:1 with
10 - 15 min
on-time 5s to 20s
1:5 to 1:1 with
10 - 15 min
on-time 5s to 20s
1:5 to 1:1 with
10 - 15 min
on-time 5s to 20s
25